Tag: fully fashioned stockings

Let’s say you love vintage stockings, so at an estate sale you buy a bag full of them — only to get home and have no idea what sizes you have.

Jaynie Van Roe of Here’s Looking Like You, Kid (who has an excellent post on what you kneed to know about vintage fully fashioned stockings) shares tips for finding the size of vintage stockings:

Vintage stockings, original non-stretching nylon stockings, are sold by two measurements: foot size and leg length. But what if the stocking’s size markings, usually printed on the stocking welt (the top, where you attach the garters), aren’t legible or missing entirely? Well then you are going to have to measure the stockings themselves to determine their size.

Before we begin, please note the following:

In this case, “vintage stockings” refers to non-stretch nylon stockings which were made mainly from the 1940s through the 1960s, when Lycra and other stretch hosiery entered the market. Though 100% nylon stockings continued to be made, and its form of sizing continued to be used by some brands, the stretch hose limited the range of sizing to today’s more familiar ‘Small’, ‘Medium’, ‘Tall’ and ‘Queen’ — and the related A, B, C or D. (The extra give in these stretchier stockings and pantyhose literally allowed manufacturers to ‘lump’ women into fewer sizes, reducing cost and, we vintage fans feel, decreasing a more specific fit.)

Then, as today, there are variations in sizing by stocking brand — and sometimes within the same brand. The top brand names tend to be more consistent in their sizing (Hanes & Berkshire, for example, tend to be incredibly consistent), but even specific brand consistency may vary greatly from the sizing of other brands (stockings by Alberts, including the sub-brand of Araline, for example, measure an extra half inch in the foot and an extra inch longer in length too).

Since worn stockings will be a little larger (even freshly laundered ones), than unworn stockings, these sizing measurements work for unworn vintage stockings.

However generalized these sizing measurement tips are, you can get a pretty good idea of fit — especially if you compare the measurements to the measurements of your favorite fitting pair of worn vintage stockings!

How To Find The Size Of Vintage Stockings

In order to best measure the stocking, I recommend beginning by securing a tape measure to a table top, taping it down just like at the counters in fabric departments, so that you have both hands free to handle the stocking.

If you don’t have a measuring tape, get one; they’re cheap and you’ll use them over and over again. (I suggest you carry a tape measure with you when you visit estate sales, thrift stores, flea markets, etc. too — you can always ask for a literal hand with measuring!) Or, you can tape paper the length of the table, mark off your dimensions, and measure them later.

Once you have the measuring tape securely in place, you’re ready to get your measures. Since true stocking size is always determined by the foot measurement, we’ll begin there.

The industry standard for measuring the foot of a stocking is to measure from the tip of the toe to mid heel, however, most people are more comfortable defining the end of the heel rather than making a guesstimate of the middle of the heel, so I’ll be discussing measurements from the tip of the toe to the end of the heel. That said, that’s what you do.

Place the tip of the stocking toe at the top of your measuring tape and, holding it firmly in place, extend the stocking foot taut along the length of the tape measure. As you extend the stocking’s foot, keep it pulled taut — not stretched; apply just enough tension to remove the folds and wrinkles in the nylon. Measure the distance between the tip of the stocking’s toe to the end of the heel (the darker, reinforced area).

Just as with shoe sizes, a measurement of 10 inches does not equal a size 10 stocking — well, not quite, anyway. If your measurement was taken from the tip of the toe to mid-heel, then the number of inches does indeed give you the stocking’s foot size. (So if you’re comfortable with assessing the middle of a stocking’s heel, go for it!) But if you’ve measured the stocking from the tip of the toe to the end of the heel it’s still easy to get the size: subtract either ½ or ¾ an inch to obtain the true stocking size.

Which one? If your stocking is smaller, measures 9 ½ inches or less, subtract half an inch; if your stocking is larger, measures 10 inches or more, subtract ¾ inches. (Larger stockings have a larger heel reinforcement.)

To get stocking length, measure from the bottom of the heel to the top of the welt, using the tips above. The measurement you get is the size; no math necessary.

STOCKING  SIZE	STOCKING LENGTH
	SHORT	MEDIUM	LONG	XL	OPERA
8 1/2	28 1/2	29	31	33
9	29	30 1/2	32	33
9 1/2	29 1/2	31	33	35	37
10	30	32	34	36	38
10 1/2	31	32 1/2	34 1/2	36 1/2	39
11		33	35	37	39
11 1/2		33 1/2	35 1/2	37 1/2	40
12					40
13					40